AC220V/26W SOX ELECTRONIC BALLAST

Small size, light weight. Convenient for installation Stabilizes the light

Apply to energy saving lamp, street lamp light tunnel light, mix street lamp and etc.

It Widely used in road lighting, railway station , the airport, seaport, dock, quarry, foundries, rolling mills.

The product of features:

Uses the monolithic MCU control technology, high level of integration, reliable performance.

Wide voltage input, constant power output, to ensure the quality of light source used

Fully eliminate twinkle and "acoustic resonance"

High input power factor, low harmonic content, meanwhile,

power and other equipment no interference

With short circuit, open circuit, over-voltage, owe pressure, flow, hot lights start and etc for protection function.

USES the high quality aluminum shell heat dissipation, use range of  widely the environment temperature, low temperature,Small volume, light weight, can be installed on the built-in within all sorts of lamps

Technical parameters:

Voltage:180vac~260vac    short circuit  protection       yes   

Ratio voltage:220vac        open circuit  protection       yes

Input frequency:50hz~60hz  heat circuit   protection     yes

Output power:26W            Lamp failure protection      yes

Power factor:>0.98      max distance to lamp           12M

crest factor:<1.7           Environment temperature  -25°C~+55°C

Harmonic content<10%    size (mm)    166*76*48

                                 Packing size(mm) 180*82*55

POWER :  >90%            weight:    0.5kg

T-case max:80°C            standard quality:ISO 9001(2008) 

NOTE:

To Install and remove must the power off.

First join output line, and to the input line, finally turn on the power.

When the power cord don't touch any wire; The power cord is close, and do not immediately contact output  the wires.

reverse connect will damage the ballast about Input and output lines ,and input line of AC electronic ballast need which pay attention to negative.

In order to Must guarantee the ballast in the parameters specified environment work .

Refuse to use non-professional equipment measure the machine

according to ISO9001 international quality management system standard production  for product, the product has two years  assurance of quality and provides the technical support.

BERSN’s HID electric ballasts matching PHILIPS OSRAM and GE by the production of light source .if not belong to the following three production or new  light , please make sure to provide light test samples.

AC220V/26W SOX ELECTRONIC BALLAST